Quart Healthcare Topaz 8 Plus User Manual page 12

Warning: the Control Unit should always be operating to prevent pressure
wounds.
 In operate mode, press operate/standby button
standby mode. The system should be in standby mode before shut down.
Switch the power switch
on the display to shut off the system.
Note: Power failure alarm will be triggered if the power is switched off in
operating mode (refer to 5.2.3 Audiovisual Alarm). Press power switch
restart the system, or press Alarm Mute
Alarm Mute).
5.2.2 CPR

When CPR needs to be performed, quickly rotate the CPR valve to "OPEN"
position, at the same time, disconnect the hose connector from the Control Unit
to speed up the air release.
5.2.3 Audiovisual Alarm
 Power Failure – When electrical shortages occur or power cord is unplugged
without turning off the Control Unit or
unintentionally), the "Power Failure" indicator will light up along with buzzer
and will last 20 minutes.
NOTE: When the Control Unit has not been used for more than 3 months, the
Control Unit may need 6 hours or more of operating time for the alarms to function
properly.
Table 1 Weight and Comfort Level Reference
to off and the warning code"
to turn off the system (refer 5.2.4
is pressed (intentionally or
11
for the system to enter
"will appear
to