Preparatory Settings - Sony EXMOR PMW-EX1 Operating Instructions Manual

When adjustments are required, set the mode to
Store.

Preparatory Settings

Before you start recording using the Shot
Transition function, make the necessary settings
with the CAMERA SET menu in advance.
The conditions you set are indicated in the shot
transition information area on the screen when
you set the shot-transition operation mode to
"Execute."
Shot-transition information area
Progress bar
S
0s 12s
Rec Link : Of f
Rec Link status
Start timer indication
Setting procedure
1
Select "Shot Transition" from the
CAMERA SET menu.
CAMERA SET
Return
Gain Setup
B
Shu t t e r
B
EX Slow Shut t e r
B
Shot Tr ans i t ion
B
00:00
MF Ass i s t : O f f
Color Bar Type : Mul t i
2
Specify the conditions for a shot
transition.
Trans Time
After you set "Time/Speed" to "Time," set
the duration of a transition in the range of 2
to 15 sec in steps of 1 second.
Trans Speed
After you set "Time/Speed" to "Speed," set
the zoom transition speed (specifying the
time to be taken for the zoom moving from
the TELE end to the WIDE end at a certain
speed).
The setting range is from 1 to 10. The larger
the number you set, the higher speed.
E
Transition pattern
Transition time
Return
Trans Time : 2sec
Trans Speed : 5
Time/Speed : Speed
Trans Curve : Soft Stop
St a r t Timer : Of f
Rec Link : Of f
Time/Speed
Set whether to specify the duration of a
transition by time or by speed of zoom
transition.
Setting Contents
Time The "Transition Time" setting is valid.
Speed The "Transition Speed" setting is
valid.
Trans Curve
Select the transition pattern.
The corresponding icon is displayed in the
shot transition information area.
Setting Contents
and icon
Linear To make the transition linearly.
P
Soft Trans To make the transition slowly at
the beginning and end but linearly
in between.
P
Soft Stop To make the transition slowly near
the end.
P
P: Parameter level T: Transition of time
Start Timer
Set the time from start of recording to start of
the shot transition.
The countdown indication is displayed in the
shot-transition information area until the shot
transition is started by the Start Timer.
Rec Link
Set whether to link shot-transition start and
target shot selection to recording start.
The setting status is displayed in the shot
transition information area.
T
T
T
Shot Transition 65