Sony EXMOR PMW-EX1 Operating Instructions Manual page 97

Example
CAMERA SET
Return
Gain Setup
B
Shu t t e r
B
EX Slow Shut t e r
B
Shot Tr ans i t ion
B
00:00
MF Ass i s t : O f f O n
Color Bar Type : Mul t i O f f
Choices
4
For the item that has subitems, turn the
jog dial or tilt the joystick back or forth
to set the cursor to the subitem you wish
to set then press the dial or the joystick
to proceed.
The available values of the selected subitems
are displayed, and the cursor moves to the
current value.
CAMERA SET
Return
Gain Setup
B
Shu t t e r
B
EX Slow Shut t e r
B
Shot Tr ans i t ion
B
00:00
MF Ass i s t : O f f
Color Bar Type : Mul t i
• The available value area can show 7 lines at
maximum. When all the selectable values
cannot be displayed at one time, you can
scroll the display up or down by moving the
cursor.
A triangle appears at the upper or lower
right corner of the available value area to
indicate that scrolling is enabled.
• For items having a wide range of available
values (example: –99 to +99), the available
value area is not displayed. The current
setting is highlighted instead, indicating
that the setting is ready for change.
5
Select the desired value by turning the
jog dial or tilting the joystick back or
forth then press the dial or the joystick
to make the setting.
The setting is changed, and the new setting is
displayed.
When you select "Execute" for an execution
item, the corresponding function is executed.
Return 18dB
Low : 12dB
Mid : 9dB
High 6dB
3dB
0dB
-3dB
Available value area
For an item that requires your confirmation
When you select an item that you must confirm
3
before execution in step
temporarily disappears, and a confirmation
message is displayed. Following the instructions
of message, specify whether to execute or cancel.
Entering a character string
When you select an item for which a character
string, such as a time value or filename, is to be
specified, the input area for the character string is
highlighted, and "SET" appears at the right end.
1
Select characters by turning the jog dial
or tilting the joystick back and forth
then press the dial or joystick to
proceed.
The cursor moves to the next column.
To return to the previous column, tilt the
joystick to the left.
2
Perform setting in the same manner up
to the last column/digit.
The cursor moves to "SET."
3
Press the jog dial or the joystick.
The setting is completed.
Terminating the menu operation
Press the MENU button.
The normal camera picture is resumed.
Basic Menu Operations
, the menu display
97