Sony Digital betacam DVW-970 Operation Manual page 146

No. Page
M04 BATTERY
M05 AUDIO-1
146
Menu List
Item Settings
BEFORE END 1 5/10/15 to 95/100%
(in 5% steps)
END 1 0/1/2/3/4/5%
BEFORE END 2 11.0 to 17.0 V
(in 0.1 V steps)
END 2 10.5 to 11.5 V
(in 0.1 V steps)
BEFORE END 3 11.0 to 17.0 V
(in 0.1 V steps)
END 3 10.5 to 14.0 V
(in 0.1 V steps)
BATT REMAIN 1/2/3
DISP
AUDIO OUT (F/R) CUE/EE
REC AUDIO OUT EE/SAVE
CA-701 AUDIO IN ENABL/DSABL
AUDIO CH3/4 CH1/2/SW
MODE
REAR XLR AUTO OFF/ON
FRONT MIC REF –60 dB/–50 dB/–40
dB
REAR MIC REF –60 dB/–50 dB/–40
dB
Default Description
5% Used when a Sony-made battery pack, such
as BP-GL65/GL95, is used. Set the voltage
warning level just before the battery ends.
0% Used when a Sony-made battery pack, such
as BP-GL65/GL95, is used. Set the voltage
level at which the battery ends and the
camcorder stops operation, just before the
battery ends.
11.3 Used when a Sony-made battery pack, such
as BP-L60S, is used. Set the voltage warning
level just before the battery ends.
11.0 Used when a Sony-made battery pack, such
as BP-L60S, is used. Set the voltage level at
which the battery ends and the camcorder
stops operation, just before the battery ends.
11.8 Used when a battery pack other than a Sony-
made one or an external power connected to
the DC IN connector is used. Set the voltage
warning level just before the battery ends.
11.0 Used when a battery pack other than a Sony-
made one or an external power connected to
the DC IN connector is used. Set the voltage
level at which the battery ends and the
camcorder stops operation, just before the
battery ends.
1 1: Standard mode
2: LCD remaining indication mode: One
the LCD indicates 10% for a battery
classified in <Others..., EXT DC> type.
3: ANTON mode: Remaining detection of the
ANTON type is made even for a battery
classified in <SONY> type.
EE Selects the audio output signal during FF/
REW.
CUE: cue audio signal
EE: Input signal
EE Selects the audio output signal during
recording.
EE: Input signal
SAVE: Not to outputl
ENABL When a CA-701 camera adaptor is
connected, select whether or not to enable
input of audio channels 3 and 4 from the
camera adaptor.
ENABL: Camera adaptor can be used.
DSABL: Camera adaptor cannot be used.
SW Selects the sources to be recorded to
channels CH-3/4.
CH1/2: Same sources as CH-1/2.
SW: Signals selected by the AUDIO IN CH-3/
CH-4 switches.
OFF Turns the XLR connection automatic
detection on/off .
–60 dB Sets the reference level of the front
microphone.
–60 dB Sets the reference level when the AUDIO IN
CH1 or CH2 connector is set to MIC.
x
on