Chamberlain EL Series Programming Manual page 2

KEYPAD PROGRAMMING GUIDE
1. CCTV Camera: Optional
2. Call Button: Press to call a resident inside the complex, or office.
3. Status LED: Solid Red (EL25 idle power, doors are locked); Blinking Red
(Strikes and Out for a door); Solid Green (Granted access for a
door); Blinking Green (Latch for a door is unlocked). NOTE: All
references are for door 1.
4. Microphone
5. Asterisk Key: "Start Programming Mode" or a Cancel Key.
6. Pound Key: Data field separator, optional skip step or enter key.
Call a resident using the directory codes.
7. Visitor Volume Key: Visitors can physically adjust the speaker
volume of the unit. Unit will return to programmed volume setting
when transaction complete.
8. Up/Down Key: Serves no function on this unit.
9. Help Key: Receive a quick audio description of a keypad button by
pressing the Help key followed by the key to be described.
10. Lights: Top and Bottom of Keypad.
11. Speaker: Allows resident and visitors to communicate; plays responses to
communicate programming or function commands.
1. CCTV Camera: Optional
2. Call Button: Press to call a resident
inside the complex, or office. Also
when calling someone using the
directory code listing.
3. Microphone
4. Asterisk Key: "Start Programming
Mode" or a Cancel Key.
5. Pound Key: Data field separator,
optional skip step or enter key. Call a
resident using the directory codes.
6. Visitor Volume Key: Visitors can
physically adjust the speaker volume of
the unit. Unit will return to
programmed volume setting when
transaction complete.
7. Up/Down Key: For scrolling through
tenant listing.
8. Help Key: Receive a quick audio
description of a keypad button by
pressing the Help key followed by the
key to be described.
9. Speaker: Allows resident and visitors
to communicate; plays responses to
communicate programming or function
commands.
10. LCD Display (optional)
11. Postal Plug
1
3
4
3
1
11
9
4
1
10
11
11 11
9
2
8
5 7
6
EL2000SS
10
8
7
6
5
2
EL25