Copying the image recorded with the
memory card slot to mini DVCAM tapes
You can copy still images or titles recorded with the memory card slot and record them to a
mini DVCAM tape.
Before operation
•Insert a mini DVCAM tape for recording.
•Insert the PC card adaptor (with a "Memory Stick" inside) or a PC card to the unit.
(1) Set the POWER switch to VTR.
(2) Using the tape transport buttons, search a point where you want to record the
desired still image. Set the mini DVCAM tape to playback pause mode.
(3) Press r REC to set the mini DVCAM tape to recording pause mode.
(4) Play back the still image you want to copy.
(5) Press P to start recording and press P again to stop.
(6) If you have more to copy, repeat steps 4 and 5.
To stop copying in the middle
Press π.
During copying
You cannot operate the following buttons:
MEMORY PLAY, MEMORY INDEX, MEMORY DELETE, MEMORY +, and MEMORY –.
112
2
4
PLAY
3
5
REC
PAUSE
1