Sony DVCAM DSR-PD100AP Operating Instructions Manual page 30

Changing the mode settings
AUDIO MIX*
Select this item to adjust the balance between the stereo 1 and stereo 2 by turning the control
dial.
NTSC PB <ON PAL TV/NTSC 4.43> (DSR-PD100AP only)
•Normally select ON PAL TV.
•Select NTSC 4.43 when playing back a tape recorded in the NTSC color system. When you
play back on a Multi System TV, select the best mode while watching the picture on the
TV.
Items for the
LCD B.L. <BRT NORMAL/BRIGHT>
•Normally select BRT NORMAL.
•Select BRIGHT when the LCD screen is dark. The battery consumption increases by 10 to
20%.
Even if you adjust the LCD B.L., the recorded picture is not affected.
LCD COLOR (LCD COLOUR)
Select this item and change the level of the indicator by turning the control dial up (+) or
down (–) to adjust the color intensity of the picture.
VF BRIGHT
Close the LCD panel.
Select this item to adjust the brightness of the viewfinder. The viewfinder becomes brighter
when you turn the control dial up (+), and darker when you turn it down (–).
Items for the
CONTINUOUS <OFF/ON/MULTI SCRN>
•Select OFF not to record continuously.
•Select ON to record 2 to 4 pictures continuously.
•Select MULTI SCRN to record nine pictures continuously.
QUALITY <STANDARD/FINE/SUPER FINE>
•Select STANDARD to record still pictures in the standard image quality mode, using the
memory card slot.
•Select FINE to record still pictures in the fine image quality mode, using the memory card
slot.
•Select SUPER FINE to record still pictures in the superfine image quality mode, using the
memory card slot.
PROTECT <OFF/ON>
•Normally select OFF not to protect still pictures.
•Select ON to protect selected still pictures against accidental erasure. See page 108 for
details.
SLIDE SHOW
Select this item to play back images in a continuous loop. See page 114 for details.
DELETE ALL
Select this item to delete all the images. See page 110 for details.
FORMAT
Select this item to format "Memory Stick"s or PC cards. See page 96 for details.
30
LCD/VF SET menu
MEMORY SET menu