Sony DVCAM DSR-PD100AP Operating Instructions Manual page 140

Identifying the parts
%∞
%§
%¶
%•
%∞ LANC l control jack
l stands for Local Application Control Bus
System. The l control jack is used for
controlling the tape transport of video
equipment and peripherals connected to it.
This jack has the same function as the jack
indicated as CONTROL L or REMOTE.
%§ DV IN/OUT jack (p. 83)
This "i.LINK" mark is a trademark of Sony
Corporation and indicates that this product is
in agreement with IEEE 1394-1995
specifications and their revisions.
The DV IN/OUT jack is i.LINK compatible.
%¶ Tripod receptacle (p. 21)
Make sure that the length of the tripod screw
is less than 6.5 mm (9/32 inch). Otherwise,
you cannot attach the tripod securely and the
screw may damage the camcorder.
XLR adaptor
1
2
1 LEVEL selector (p. 63)
2 +48V switch (p. 63)
3 PUSH button (p. 63)
140
%• MEMORY RELEASE lever
%ª 2 (headphones) jack (p. 23)
^º AUDIO/VIDEO jack (p. 72, 82)
^¡ S VIDEO jack (p. 34, 72, 82)
^™ Camera recording lamp
^£ MIC jack (PLUG IN POWER) (p. 87)
Connect an external microphone (not
supplied). This jack also accepts a "plug-in-
power" microphone.
4 MIC IN connector (p. 63)
5 Cable holder
6 Screw (p. 63)
%ª
^º
^¡
^™
^£
3
4
5
6