Sony DVCAM DSR-PD100AP Operating Instructions Manual page 133

Trouble check
Others
Symptom
No function works though the power is
on.
DV synchro-editing does not function.
Cause and/or corrective actions
• Disconnect the power cord (mains lead) of the AC power
adaptor or remove the battery pack, then reconnect it in
about 1 minute. Turn the power on. If the functions still
do not work, open the LCD panel and press the RESET
button beside the speaker using a sharp-pointed object. (If
you press the RESET button, all the settings including the
date and time return to the default.) (p. 138)
• The input selector on the VCR is not set correctly.
m Set the selector to DV input position. If you use
another DVCAM camcorder, set the power switch to
VTR.
• The camcorder is connected to DVCAM equipment of
other than Sony.
m Operate normal editing.
• Setting program on a blank portion of the tape is
attempted.
m Set the program again on a recorded portion.
133