Chapter 6 Saving And Loading The User Setting Data; Saving And Loading User Files; Handling The "Memory Stick - Sony DSR-400K/400PK Operating Instructions Manual

Saving and Loading the
User Setting Data
Saving and Loading User
Files
The camcorder is equipped with a "Memory Stick" slot,
which enables you to save the settings in the USER menu
as a user file onto the "Memory Stick". You can load these
files from the "Memory Stick" for immediate recall of a
particular setting configuration. In addition to user file,
you can save scene files, lens files, reference files and ALL
files in a "Memory Stick".
When a menu is displayed, you can set up the camcorder
so that inserting a "Memory Stick" automatically jumps to
the appropriate file-related menu page.
For details about scene files, see "Saving and Loading
Scene Files" on page 114.
For details about lens files, reference files and ALL files,
refer to "Menu list" on page 76.
For details of the function for jumping to the appropriate
file-related menu page, see "Displaying a File-Related
Menu Page When Inserting a "Memory Stick"" on page
118.

Handling the "Memory Stick"

The "Memory Stick" can be inserted to or removed from
the camcorder with the power turned on or off.
"Memory Stick" usable with this
camcorder
With this camcorder, you can use "Memory Stick" whose
capacity does not exceed 128 MB.
For details, see "About a "Memory Stick"" on page 124.
110

Saving and Loading User Files

Chapter
To insert a "Memory Stick"
1
Remove the "Memory Stick" slot cover on the back of
the camcorder.
2
Insert the "Memory Stick" with its label side facing the
"Memory Stick" logo on the camcorder.
Label side of "Memory Stick"
Note
If it does not fit into the slot properly or if there is some
resistance when you insert it, the "Memory Stick" may be
turned around or upside down. Do not force the "Memory
Stick" into the slot. Confirm the direction of the notch and
arrow on the "Memory Stick" before inserting the
"Memory Stick", and then try inserting it again.
To remove the "Memory Stick"
1
Check that the access indicator is not lit, then gently
press in the "Memory Stick" once and release.
The "Memory Stick" pops out.
6