Using The User Menu (Example Of The Menu Operation) - Sony DSR-400K/400PK Operating Instructions Manual

To confirm the setting items and values on
the menu
Each time you press the MENU knob, the menu display
switches in the following sequence.
Example: When using the OPERATION menu
TOP menu
<TOP MENU>
USER
USER MENU CUSTOMIZE
ALL
OPERATION
If the menu has
PAINT
MAINTENANCE
not been used
FILE
DIAGNOSIS
If the menu has been
used before
Menu selection mode
? 01 OUTPUT TOP
LCD BRIGHT<L> : 0
LCD BRIGHT<H> : 0
LCD COLOR : 0
Setting item selection mode
01 OUTPUT TOP
LCD BRIGHT<L> : 0
LCD BRIGHT<H> : 0
LCD COLOR : 0
Setting value adjustment mode
01 OUTPUT TOP
LCD BRIGHT<L> :? 0
LCD BRIGHT<H> : 0
LCD COLOR : 0
Note
If the TOP menu has not been displayed since the
camcorder is turned on, TOP does not appear on the upper
right in the above screens, and you cannot go to the TOP
menu. In this case, follow the procedure in "To display the
TOP menu" on page 94.
To display the TOP menu when another menu is
displayed
Move b to TOP displayed at the top right of each page of
the menu, and press the MENU knob. Or flick the MENU
switch repeatedly to CANCEL until the TOP menu is
displayed.
Using the USER menu (Example of
the menu operation)
This section explains menu operations using the USER
menu as an example. The operations are the same for the
ALL, OPERATION, PAINT, MAINTENANCE, FILE,
and DIAGNOSIS menus. For details about how to operate
the USER MENU CUSTOMIZE menu, see "Editing the
USER menu" on page 96.
Also, if an optional extension boards has not been installed
in your camcorder, some items are not displayed.
1
CONTENTS page
?U00 CONTENTS
TOP
01.USER1
02.USER2
03.USER3
04.USER4
05.USER5
06.USER6
07.USER7
08.USER8
Menu selection page
U00 CONTENTS TOP
01.USER1
02.USER2
03.USER3
04.USER4
05.USER5
06.USER6
07.USER7
08.USER8
Flick the MENU switch to ON.
The USER menu normally appears.
?U01 USER TOP
If it does not, turn the MENU knob to move b to
USER in the TOP menu, and press the MENU knob.
If the USER menu has been used before, the last
accessed page appears. In this case, go to step 2.
If this is the first time the USER menu has been
displayed, the CONTENTS page of the USER menu
appears. In this case, follow the procedure below.
1 Press the MENU knob. Then turn the MENU knob
to move b to the desired page number.
U00 CONTENTS
01.USER1
02.USER2
03.USER3
04.USER4
05.USER5
06.USER6
07.USER7
08.USER8
2 Press the MENU knob again.
The page selected in 1 is displayed. Go to step 3.
When you set items on the ALL, OPERATION,
PAINT, MAINTENANCE, FILE, or DIAGNOSIS
menu, move b to the menu that contains the desired
item in the TOP menu, and then press the MENU
knob.
Menu Organization and Operation
This indicates that
the menu screen can
TOP
be scrolled.
b
95