Kenwood NX-200 Service Manual page 12

NX-200(G)
■Assembly information (Sheet/Cushion)
When "Main Parts" is changed (ordered), "Assembled
Sheet/Cushion" should also be changed (ordered) to-
gether.
The Sticker and Sheet etc are non-reusable parts. It re-
quires the new one to get the radio's performance after
repairs.
For example, when "Plastic Cabinet (A02-4002-23 (6-key)/
A02-4003-23 (18-key))" is changed, "Sticker (B42-7417-
04)", "Badge (B43-1606-04)" and "Fibrous Sheet (G10-
1373-04)" should be ordered and changed together be-
cause Sticker (B42-7417-04), Badge (B43-1606-04) and
Fibrous Sheet (G10-1373-04) are non-reusable.
Main Parts
Part Name
Plastic Cabinet (6-key)
Plastic Cabinet (18-key)
LCD ASSY
Cord ASSY (50-pin
FPC)
Speaker
Switch Unit (6-key FPC)
Switch Unit (PTT FPC)
Chassis
Terminal Block
12
DISASSEMBLY FOR REPAIR
Part Number Part Name
Sticker
A02-4002-23
Badge
A02-4003-23
Fibrous Sheet (SP)
B38-0923-05 Adhesive Sheet (LCD)
X42-3510-10 Cushion (50-pin FPC)
Rubber Cushion (SP)
T07-0755-25
Sheet (SP)
Adhesive Sheet
(6-key FPC)
X41-3840-10
Adhesive Sheet
(6-key FPC)
Sheet (PTT)
X41-3830-10
Adhesive Sheet
(PTT FPC)
Relay Hardware
(VCO-Chassis)
Sheet (Air)
A10-4186-04
Rubber Sheet (FET)
Sheet (Air)
Cushion (ANT)
Adhesive Sheet
E72-0425-03
(Terminal Block)
Assembled Sheet/ Cushion
Part Number
B42-7417-04 "NEXEDGE" is printed.
B43-1606-04 "KENWOOD" is printed.
G10-1373-04
Used for fi xing the LCD ASSY on the Illumination Guide
(LCD).
J99-0714-04
Also used for fi xing the Illumination Guide (LCD) on the
Control Unit.
G13-2293-04
G11-4272-14
Used for stabilizing the waterproof performance.
G11-4458-14 "•" (a hole) on the Sheet (SP) shows the upper side (6-key
FPC side).
Used for fi xing the Switch Unit (6-key FPC) from the back
J99-0745-04
side of the Holder (FG-SP) before soldering.
Used for fi xing the Switch Unit (6-key FPC) on the Holder
J99-0712-14
(FG-SP).
Used for fi xing the Push Knob (PTT) on the Switch Unit (PTT
G11-4428-04
FPC) and stabilizing the waterproof performance.
J99-0711-04 Used for fi xing the Switch Unit (PTT FPC) on the Chassis.
E29-1221-14 Used for stabilizing the shield performance of the VCO.
This sheet is put on the leak check hole.
G11-4500-04
This sheet lets air through, but does not let water through.
G11-4429-04 Used for stabilizing the radiation performance of the FET.
G11-4440-04 This sheet is a protect cover of the sheet (G11-4331-04).
G13-2220-04 Used for fi xing the Terminal ASSY.
Used for fi xing the Terminal Block and the Packing (Terminal
J99-0747-04
Block).
Remark