Recording Superimposed Images On A Tape - Sony Handycam DCR-TRV40E Operating Instructions Manual

Superimposing a still image in
the "Memory Stick" on an image
– MEMORY MIX
Recording superimposed
images on a tape
Before operation
•Insert a tape for recording into your camcorder.
•Insert a "Memory Stick" recorded still images
into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) Press FN to display PAGE1.
(3) Press MEM MIX. The last recorded or last
composed image appears on the lower part of
the screen as a thumbnail image.
(4) Press –/+ on the right lower corner of the
screen to select the still image which you want
to superimpose.
– : To see the previous image
+: To see the next image
(5) Press a desired mode. The still image is
superimposed on the moving picture.
(6) Press –/+ on the left lower corner of the
screen to adjust the effect, then press
to return to PAGE1.
M. CHROM: Blue chroma key (only blue
background portion) to extract
a still image and superimpose
it on a moving image
M. LUMI: Brightness level used when
extracting a still image and
superimposing it on a moving
image
C. CHROM: Blue chroma key (only blue
background portion) to extract
a moving picture and
superimpose it on a still image
M. OVERLAP: No adjustment necessary
The fewer bars there are on the screen, the
stronger the effect.
(7) Press EXIT to return to FN.
(8) Press START/STOP to start recording.
(1)
(2)
(3)
(4)
OK
(5)
(6)
(7)
(8) 177