Recording Superimposed Images On A Tape - Sony DVCAM DSR-PDX10 Operating Instructions Manual

Superimposing a still image in the "Memory Stick" on an image
– MEMORY MIX

Recording superimposed images on a tape

Before operation
• Insert a tape for recording into your camcorder.
• Insert a "Memory Stick" recorded still images into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) Press FN to display PAGE1.
(3) Press MEM MIX. The last recorded or last composed image appears on the
(4) Press –/+ on the right lower corner of the screen to select the still image which
(5) Press a desired mode. The still image is superimposed on the moving picture.
(6) Press –/+ on the left lower corner of the screen to adjust the effect, then press
(7) Press EXIT to return to FN.
(8) Press START/STOP to start recording.
156
lower part of the screen as a thumbnail image.
you want to superimpose.
– : To see the previous image
+: To see the next image
OK to return to PAGE1.
M. CHROM: Blue chroma key (only blue background portion) to extract a
still image and superimpose it on a moving image
M. LUMI: Brightness level used when extracting a still image and
superimposing it on a moving image
C. CHROM: Blue chroma key (only blue background portion) to extract a
moving picture and superimpose it on a still image
M. OVERLAP: No adjustment necessary
The fewer bars there are on the screen, the stronger the effect.