Sony Handycam DCR-TRV40E Operating Instructions Manual page 255

Changing the default settings with the menu
Icon/item Mode
MEMORY SET
STILL SET
BURST z OFF
NORMAL
HIGH SPEED
EXP BRKTG
MULTI SCRN
QUALITY z SUPER FINE
FINE
STANDARD
IMAGESIZE z 1360 1020
640 480
MOVIE SET
IMAGESIZE z 320 240
160 112
REMAIN z AUTO
ON
Meaning
To not record continuously.
To record from three to nine images continuously
(p. 163)
To record up to 16 images continuously fast
To record three images continuously with different
exposure
To record nine images continuously, display the
images on a single page divided into nine boxes
To record still images in the finest image quality
mode (p. 155)
To record still images in the fine image quality mode
To record still images in the standard image quality
mode
To record still images at 1360 1020 size (p. 158)
To record still images at 640 480 size
To record moving pictures at 320 240 size
(p. 158).
To record moving pictures at 160 112 size.
To display the remaining capacity of the "Memory
Stick" in the following cases:
• For five seconds after setting the POWER switch to
MEMORY/NETWORK (DCR-TRV50E only) or
VCR
• For five seconds after setting the POWER switch to
MEMORY/NETWORK (DCR-TRV50E only) or
VCR and inserting a "Memory Stick"
• When the remaining capacity of the "Memory
Stick" is less than two minutes after setting the
POWER switch to MEMORY/NETWORK (DCR-
TRV50E only)
• For five seconds from the start of moving picture
recording
• For five seconds after completing a moving picture
recording
To always display the remaining capacity of the
"Memory Stick"
(continued on the following page)
POWER
switch
MEMORY/
NETWORK
VCR
MEMORY/
NETWORK
MEMORY/
NETWORK
VCR
MEMORY/
NETWORK
VCR
MEMORY/
NETWORK
255