Plumbed In Water Connection - Miele CVA 6805 Operating And Installation Instructions

Plumbed in water connection

Notes on connecting to the
mains water supply

Connection to the mains water
supply should only be carried out by
a qualified and competent person.
Disconnect the coffee machine from
the mains electricity supply before
connecting it to the mains water
supply.
Close the stopcock before
connecting the water intake hose to
the coffee machine.

The water being used should
meet the drinking water standards of
the country where the machine is
used.
The coffee machine meets the
requirements of IEC 61770 and EN
61770.
Connection to the household water
supply must comply with current
national and local safety regulations
in the country in which the coffee
machine is being installed. All items
used for connecting the machine to
the mains water supply must comply
with current national and local safety
regulations in the country in which
the machine is being installed.
94
The machine is only suitable for
connection to a cold water supply
which
– is connected directly to the fresh
water supply to guarantee circulation
of water throughout the system.
Avoid laying the water hose in such a
way that water can collect in it, as
this can affect the taste of the drinks.
– The coffee machine is constructed to
comply with the relevant DIN
standard and may be connected to
the mains drinking water supply
without a non-return valve if national
regulations permit.
– The water intake hose must be able
to sustain operating pressure.
– The water pressure (flow rate) must
be between 1 and 10 bar (10
6
10 Pa).
– The stainless steel hose supplied is
1.5 m long and must not be
lengthened.
– The water intake system must
comply with hygiene regulations.
– A stopcock must be provided
between the stainless steel hose and
the household water supply to ensure
that the water supply can be cut off if
necessary.
The stocpcock should be easily
accessible after the machine has
been built in.
5
and