Warning Indicators And Messages - Sony Handycam DCR-TRV10E Operating Instructions Manual

English

Warning indicators and messages

If indicators and messages appear in the viewfinder, on the LCD screen or in the display window,
check the following:
See the page in parentheses "( )" for more information.
•The warning messages do not appear in the mirror mode.
•The indicators and messages are displayed in yellow.
Warning indicators
The video heads are dirty
Slow flashing:
•You need to clean the heads using the Sony DVM12CL cleaning cassette (not supplied) (p. 159).
The battery is dead or nearly
dead
Slow flashing:
•The battery is nearly dead.
Fast flashing:
•The battery is dead (p. 13).
Depending on conditions, the E
indicator may flash, even if there
are 5 to 10 minutes remaining.
Warning indicator as to tape
Slow flashing:
•The tape is near the end.
•No tape is inserted (p. 19).*
Fast flashing:
•The tape has run out (p. 19, 33).*
•The write-protect tab on the
cassette is out (red) (p. 19).*
You need to eject the cassette
Slow flashing:
•The write-protect tab on the cassette is out
(red) (p. 19).*
Fast flashing:
•Moisture condensation has occurred
(p. 158).
•The tape has run out (p. 19, 33).*
•The self-diagnosis display function is
activated (p. 146).*
Moisture condensation has occurred*
Fast flashing:
• Eject the cassette, turn off your
camcorder, and leave it for about 1 hour
with the cassette compartment open
(p. 158).
Warning indicator as to cassette memory
Slow flashing:
• No tape with cassette memory is inserted
(p. 19).*
Self-diagnosis display (p. 146)
C:21:00
Warning indicator as to Memory
Stick (DCR-TRV10E only)
Slow flashing:
•No Memory Stick is inserted
(p. 108).*
•Memory Stick is not formatted
correctly (p. 111).
The still image is protected
(DCR-TRV10E only)
Slow flashing:
•The still image is protected
(p. 128).*
147