Accessing The Engine And Internal Components - Toro Dingo TX 22306 Operator's Manual

Accessing the Engine and
Internal Components
Before opening any of the covers, stop the engine and
remove the key.
Opening the Hood
1. Pull out the hood latch in the front screen
(Fig. 16).
2. Swing the hood up until it locks open (Fig. 16).
1
2
m–4737
Figure 16
1. Hood
Closing the Hood
1. Pull up on the bar securing the hood in the open
position and lower the hood (Fig. 17).
2. Hood latch
1
m–4771
Figure 17
1. Bar
2. Secure the hood by pushing down on the front of
the hood until it locks in place.
Opening the Rear Access Cover
1. Pull out and forward on the latch to remove it
from the locking bracket on the traction unit
frame (Fig. 18).
2. Swing the rear access cover to the right
(Fig. 18).
Figure 18
Maintenance
m–4670
23