Step 3: Turning The Power On, And Setting The Date And Time - Sony Handycam DCR-SR210E Handbook

Step 3: Turning the
power on, and setting
the date and time
Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, the [CLOCK SET]
screen appears every time you turn on your
camcorder or change the POWER switch
position.
(HOME)
Touch the button
on the LCD
screen.
1
While pressing the green button,
turn the POWER switch repeatedly
in the direction of the arrow until
the respective lamp lights up.
(Movie): To record movies
(Still): To record still images
Go to step 3 when you turn on your
camcorder for the first time.
2
(HOME) 
Touch
 [CLOCK/ LANG]  [CLOCK
SET].
The [CLOCK SET] screen appears.
POWER switch
(SETTINGS)
3
Select the desired geographical
area with /
4
Set [SUMMERTIME], then touch
[NEXT].
5
Set [Y] (year) with
6
Select [M] with
the month with
7
Set [D] (day), hour and minute in the
same way, then touch [NEXT].
8
Make sure that the clock is correctly
set, then touch
The clock starts.
You can set any year up to the year
2037.
To turn off the power
Turn the POWER switch to OFF (CHG).

Notes
If you do not use your camcorder for about

3 months, the built-in rechargeable battery
gets discharged and the date and time settings
may be cleared from the memory. In that case,
charge the built-in rechargeable battery and
then set the date and time again (p. 97).
, then touch [NEXT].
/ .
/ , then set
/ .
.
17