Table of Contents
Advertisement
Step 3: Turning the power on, and setting the
date and time
1
Open the LCD screen of your camcorder.
Your camcorder is turned on and the lens cover is opened.
To turn on your camcorder when the LCD screen is open, press POWER.
2
Select the desired geographical area with
Touch the button on the
LCD screen
To set the date and time again, touch
(under
/
until the item appears.
3
Set [DST SET] or [SUMMERTIME], date and time, then touch
The clock starts.
If you set [DST SET] or [SUMMERTIME] to [ON], the clock advances 1 hour.
Notes
The date and time does not appear during recording, but they are automatically recorded on the
US
1
[GENERAL SET] category) [CLOCK SET]. When an item is not on the screen, touch
MODE lamp
POWER button
/
, then touch [NEXT].
(MENU) [Show others] [CLOCK/
LANG]
.
Advertisement
Table of Contents
