Sony Handycam DCR-SR210E Handbook page 61

FLASH LEVEL
You can set this function when you use the
built-in flash, or an external flash (optional)
that is compatible you're your camcorder.
HIGH (
)
Makes the flash level higher.
 NORMAL ( )
LOW (
)
Makes the flash level lower.
REDEYE REDUC
You can set this function when you record
still images using the built-in flash or an
external flash (optional) that is compatible
with your camcorder.
When you set [REDEYE REDUC] to [ON],
then set [FLASH MODE] to [AUTO] or
[ON], appears. You can prevent redeye
by activating the pre-flash before the flash
flashes.

Notes
The redeye reduction may not produce the

desired effect due to individual differences and
other conditions.
FACE DETECTION
Detects faces and adjusts the focus, color
and exposure automatically.
 ON ( )
Detects a face and shows a frame on it.
The detected face image is optimized
automatically.
Face detection frame
Face detection mark
ON[NO FRAMES] ( )
Detects a face without showing a frame.
The detected face image is optimized
automatically.
OFF
Does not use [FACE DETECTION]
function.

Notes
Faces may not be detected depending on

recording conditions.
[FACE DETECTION] may not function

properly depending on recording conditions.
Set [FACE DETECTION] to [OFF] in this case.
INDEX SET
The camcorder detects faces automatically
during movie recording. The default setting
is [ON].
Face icons and their meanings
: This icon appears when the setting is
[ON].
: This icon flashes when your camcorder
detects a face. The icon stops flashing when
the face is recorded in Face Index.
: This icon appears when faces cannot be
recorded in Face Index.
To play back scenes using Face Index, see
page 32.

Notes
The number of faces detected in a movie is

limited.
CONVERSION LENS
When using a conversion lens (optional),
use this function to record using the
optimum compensation for camera shake
for each lens.
You can select [WIDE CONVERSION]( )
or [TELE CONVERSION]( ). (The default
setting is [OFF].)
61