Dubbing To Other Devices - Sony Handycam DCR-SR210E Handbook

Dubbing to other devices

Connecting with the A/V connecting cable
You can dub images played back on your camcorder to other recording devices, such as
VCRs or DVD/HDD recorders. Connect the device in either of the following ways.
Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for
this operation (p. 13). Refer also to the instruction manuals supplied with the devices to be
connected.
Select beforehand the media which contains the image you want to dub (p. 20).

Notes
Since dubbing is performed via analog data transfer, the image quality may deteriorate.

A/V OUT jack
: Video/Signal flow
 A/V connecting cable (supplied)
The Handycam Station has an A/V
OUT jack (p. 102) and the camcorder
has an A/V Remote Connector (p. 99).
Connect the A/V connecting cable
either to the Handycam Station or to
your camcorder, according to your
setup.
 A/V connecting cable with S VIDEO
(optional)
When connecting to another device
via the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO
Device without an
S VIDEO jack
(Yellow)
(White)
(Red)
cable (optional), higher quality images
can be produced than with an A/V
connecting cable. Connect the white
and red plugs (left/right audio) and
the S VIDEO plug (S VIDEO channel)
of the A/V connecting cable with an
S VIDEO cable (optional). The yellow
plug connection is not necessary.
Connecting only the S VIDEO plug will
not output audio.
Device with an S
VIDEO jack
(White)
(Red)
(Yellow)
VCRs or DVD/HDD
recorders
7