Sony Handycam DCR-SR210E Handbook page 36

To set the aspect ratio according to the
connected TV (16:9/:3)
Change the setting according to the screen
aspect ratio of the TV you will view images
on.
 Turn the POWER switch to turn on the
camcorder.
 Touch (HOME) 
[OUTPUT SETTINGS]  [TV TYPE] 
[16:9] or [4:3] 

Notes
When you set [TV TYPE] to [4:3], the image

quality may deteriorate. Also, when the
recorded image's aspect ratio switches between
16:9 (wide) and 4:3, the image may jitter.
On some 4:3 TVs, the still images recorded in

4:3 aspect ratio may not be displayed full screen.
This is not a malfunction.
When you play back an image recorded in 16:9

(wide) aspect ratio on a 4:3 TV not compatible
with the 16:9 (wide) signal, set [TV TYPE] to
[4:3].
When your TV is monaural (When your TV has
only one audio input jack)
Connect the yellow plug of the A/V
connecting cable to the video input jack
and connect the white (left channel) or red
(right channel) plug to the audio input jack
of your TV or VCR.
36
(SETTINGS) 
.
If your TV/VCR has a 21-pin adaptor
(EUROCONNECTOR)
Use the 21-pin adaptor supplied with your
camcorder (For models with the
printed on the bottom surface only). This
adaptor is designed for output use only.
mark
TV/VCR