Loading A Setup File; Deleting Setup Files - JVC CONNECTED CAM GY-HC500U Instructions Manual

Loading a Setup File

1 Display the [Setup File] menu.
Select [System] B [Setup File] and press the
Set button (R).
(A P154 [ Setup File ] )
2 Select [Load File] and press the Set button
(R).
3 Select [Picture File], [User File] or [All File],
and press the Set button (R).
The existing files are displayed.
4 Select the file to load using the cross-
shaped button (JK), and press the Set
button (R).
.
Memo :
When the write-protect switch of the inserted SD
0
card is set, a z mark appears beside the SD
card icon. Setup files can be loaded from an SD
card even if the write-protect switch is set.
Setup files that are completely incompatible will
0
not be displayed.
(A P179 [Configuring Setup Files] )
5 Select [Load] on the confirmation screen,
and press the Set button (R).
Loading starts, and "Loading..." appears on the
screen.
.
6 Reading is complete.
After reading of the file is complete, "Complete"
appears on the screen, and the menu screen
closes automatically.

Deleting Setup Files

1 Display the [Setup File] menu.
Select [System] B [Setup File] and press the
Set button (R).
(A P154 [ Setup File ] )
2 Select [Delete File] and press the Set button
(R).
3 Select [Picture File], [User File] or [All File],
and press the Set button (R).
The existing files are displayed.
4 Select the file to delete using the cross-
shaped button (JK), and press the Set
button (R).
4
CAM1
CAM2
.
Memo :
Setup File saved on the SD card cannot be
0
deleted.
5 Select [Delete] on the confirmation screen,
and press the Set button (R).
Deletion starts, and "Deleting..." appears on the
screen.
5
.
6 Deletion is complete.
After file deletion is complete, "Complete"
appears on the screen.
Delete Picture File
Delete Picture File?
CAM1 :SUNSET
Delete
Cancel
Configuring Setup Files
4
5
181