Problem Solving Guide - Miele KM 7678 FR Operating And Installation

Problem solving guide

Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Problem
The hob cannot be
switched on.
A smell and vapours are
given off when the new
appliance is being used.
After the hob has been
switched on, or after
touching a sensor, 
appears in the timer
display for a few
seconds.
46
Cause and remedy
There is no power to the hob.
 Check whether the fuse has tripped. Contact an
electrician or Miele Service (for the minimum fuse
rating, see data plate).
There may be a technical fault.
 Disconnect the hob from the electricity supply for
approx. 1 minute. To do this:
– trip the relevant fuse or screw the fuse out com-
pletely, or
– switch off the residual current protection device
 If the appliance will still not turn on after resetting
the trip switch in the fuse box or the residual cur-
rent current device, contact a qualified electrician
or Miele Service.
The metal components have a protective coating.
When the appliance is used for the first time, this
causes a smell and possibly also vapour. The material
from which the induction coils are made also gives off
a smell in the first few hours of operation. With each
subsequent use, the odour is reduced until it disap-
pears completely. The smell and any vapours given
off do not indicate a faulty connection or appliance
and they are not hazardous to health.
The system lock or safety lock is activated.
 Deactivate the system lock or safety lock (see
"System lock / Safety lock").