Wipe Protection; Demonstration Mode; Displaying Hob Data - Miele KM 7678 FR Operating And Installation

Additional functions

Wipe protection

The hob sensors can be locked for
20 s in order, for example, to remove
soiling. The  is not locked.
Activating
 Touch the  sensor.
The time will count down in the timer
display.
Deactivating
 Touch the  sensor until the timer
display goes out.

Demonstration mode

This function enables the hob to be
demonstrated in showrooms without
heating up.
Activating / Deactivating
 Switch the hob on.
 Touch the 0 sensor control on any of
the numerical keybanks.
 Then touch the 0 and 2 sensors at
the same time for 6 seconds.
In the timer display,  flashes altern-
ately with  (demonstration mode ac-
tivated) or  (demonstration mode de-
activated) for a few seconds.
36

Displaying hob data

The model number and software ver-
sion of the hob can be displayed. There
must not be any pans on the hob.
Model number/Serial number
 Switch the hob on.
 Touch the 0 sensor control on any of
the numerical keybanks.
 Touch the 0 and 4 sensor controls at
the same time.
Numbers will appear in the timer display
one after another, separated by a dash.
Example:   (model number
KM 1234) –      (serial num-
ber)
Software version
 Switch the hob on.
 Touch the 0 sensor control on any of
the numerical keybanks.
 Touch the 0 and 3 sensor controls at
the same time.
Numbers appear in the timer display:
Example: : = Software version 2.00