Introduction; Dtp T Dsw 4K Series Description; Features - Extron electronics DTP T DSW 4K Series User Manual

Introduction

This guide describes the function, installation, and operation of the DTP T DSW 4K series
of switchers. Unless otherwise stated, the terms "switcher" and "transmitter" are used
interchangeably in this guide to refer to all of the products in the series.
This section provides the following information:
•
•
•

DTP T DSW 4K Series Description

The DTP T DSW 4K series extends and switches RGB, HDMI, and DisplayPort™ signals up
to 230 feet (70 meters) for the 233 model, and 330 feet (100 meters) for the 333 model over
shielded twisted pair (STP) cables. Both models are fully High-bandwidth Digital Content
Protection (HDCP) compliant on the HDMI and DisplayPort connections.
These switchers support data rates up to 10.2 Gbps (3.4 Gbps per color) with up to 12-bit
deep color and use the EDID Minder feature for EDID management.
The automatic output compatibility correction feature scans each output device to ensure
that the output signal is compatible with the color depth and format requirements of the
device.

Features

•
•
•
•
•
•
DTP T DSW 4K Series Description
Features
Application Diagram
The DTP T DSW 4K 233 and DTP T DSW 4K 333 transmit DisplayPort, HDMI,
or VGA plus control and analog audio up to 230 (70 meters) and 330 feet (100
meters), respectively, over an STP cable — The DTP T DSW 4K series provides
high reliability and maximum performance on an economical and easily installed cable
infrastructure.
Inputs: One DisplayPort, one HDMI, and one VGA on 15‑pin HD, one 3.5 mm
stereo mini jack for audio — The DTP T DSW 4K 333 allows for switching between
DisplayPort, HDMI, and analog video sources.
Output: One DTP 230 or 330 (depending on model) twisted pair output on RJ‑45
Auto‑switching between inputs — Auto-switching allows for simple, unmanaged
installation in locations such as in a lectern or under a conference table. When multiple
inputs are active, the switching priority is configurable.
Supports computer and video resolutions up to 4K, including 1080p/60 Deep
Color
Analog stereo audio embedding — Analog stereo audio signals can be selectively
embedded onto the digital video output signal and transported over DTP. The
DisplayPort and HDMI inputs can be set to pass the embedded digital audio, embed
the analog audio, or to automatically (HDMI and DP inputs only) embed the analog
audio when no digital audio is detected.
Extron DTP T DSW 4K Series • Introduction 1