VeriFone Forecourt Controller Interface Installation Manual page 32

24
3. Using wire nuts, connect one dispenser control wire to each FCI current
4. Connect all loop cables to the loop cable distribution board.
loop wire. Connect positive (
distribution board. Note that it might be necessary to reverse some of
the connections after you check the communications from the FCI to the
dispensers.
Note:
At sites that have both Gilbarco and Wayne dispensers, both can
be connected to the same FCI unit but the dispenser control
wires must be connected to different distribution boards.
Loop
Cables
Forecourt Controller Interface Installation Guide
+
) to positive. Repeat for each current loop
Twisted
Pair
Loop Cables
Connected to
Board
August 11, 2016