General Requirements - VeriFone Forecourt Controller Interface Installation Manual

Forecourt Controller Interface Installation Guide
Table 1: Forecourt Controller Interface Box (P/N M149-901-01-R)
Quantity
(1) unit
(1) per unit
Quantity
Various lengths
(20) per unit
(3) per unit
(1) per unit
(4) per unit
(4) per unit

General Requirements

Before you start, read the following important information:
1. Changes or modifications not expressly approved by Verifone, Inc., could
2. This equipment is not intended to be repaired by the user. All repairs
3. All installations must comply with the requirements of the National
August 11, 2016
Item
Forecourt Controller Interface
Box
Includes:
- Locking ribbon cables (4)
- AC Power Cable
- Current Loop Board
Forecourt Controller Interface
Installation Guide
Table 2: Materials Provided by Installer
18 AWG plenum rated twisted-pair cable (for example,
Belden P/N 88760). Lengths depend on configuration.
Wire nuts for splicing 18 AWG wires
1-inch metallic conduit fittings
1/2-inch Romex cable clamp
#8, 1-1/2 inch wood screws
1/8 inch toggle bolts. 3 inches long
void the user's authority to operate this equipment.
must be performed by an Authorized Service Technician or a Verifone
VASC.
Electrical Code (NFPA 70), the Code for Fuel Dispensing Facilities and
Repair Garages (NFPA 30 and 30A), OSHA regulations, including Standard
29 CFR 1910.147, and all other applicable national and local codes.
Verifone Part Number
M149-901-01-R
DOC149-901-01-R,
Revision C00
Item
3