Power-Down Memorization; Turning Off The Mount; Putting The Mount Back Into The Carrying Case - iOptron CEM40 Instruction Manual

4.6. Power-Down Memorization

The CEM40 mount can memorize its R.A. and DEC positions if the mount power is lost during
operation, even during high speed slewing. After the power is back, just do a Select and Slew to the
same star when the power is lost. The mount will continue to track the star.

4.7. Turning Off the Mount

When you have finished your observation, simply turn the mount power off and disassemble the mount
and tripod.
If the mount is set up on a pier or inside an observatory, it is recommended that you return the mount to
the Zero Position or park the telescope. This will ensure that there is no need for you to perform the
initial setup again when you power on the mount subsequently so long as the mount has not been
moved from the parked position.

4.8. Putting the Mount Back into the Carrying Case

It is recommended to disengage the gear system for transportation.
24