2.2. Identification of Parts
Polar axis cover
CW mounting housing
CW locking screw
Counterweight
CW bar
2.3. CEM40 Mount Basic Cable Connection
OFF/ON (O/I): Power Switch
DC 12V: DC power socket to power the mount (2.1mmX5.5mm, center positive)
HBX (Hand Box): For connecting to an 8407 Hand Controller
iPORT: Auxiliary port for connecting to other iOptron accessories, such as a GPS receiver,
an iStarFi WiFi adapter, an electronic focuser or for observatory dome control. DO NOT plug
your ST-4 guiding camera cable into this port as it may damage the mount or guide camera
electronics.
USB: USB port for mount-computer control and firmware upgrade
DEC gear switch
Figure 1.CEM40 mount assembly
Figure 2. Ports on a CEM40 mount
7
Dovetail saddle
Lat. Locking clamp
Az. adj. knob
Optional tripod