Fender Hot Rod Deluxe Reference And Owner's Manual page 8

Hide thumbs Also See for Hot Rod Deluxe:

HOT ROD DELUXE BOTTOM PANEL FUNCTIONS

A. LINE CORD - the Hot Rod Deluxe is equipped

with a grounding type supply cord to reduce the

possibility of shock hazard. Be sure to connect it to

a grounded AC receptacle. DO NOT ALTER THE

AC PLUG.

B. FUSE - The fuse is in the AC supply of the ampli-

fier and will help to protect the amplifier in the event

of an electrical fault or tube failure. If a fuse blows,

replace it only with one of the same type and rating.

(Refer to the specification page to determine the

correct fuse type and rating for your amplifier).

NEVER use a fuse with a higher current rating as this

could damage the equipment and present a serious

safety hazard. If the amplifier repeatedly blows

fuses, it should be taken to an authorized Fender

service center.

C. MAIN SPEAKER - This is the main plug-in con-

nection to the speakers and must always be used as

their primary connection.

D. EXTERNAL SPEAKER - Plug-in connection for

an external speaker. This jack is wired in parallel

with the main speaker jack and must ONLY be used

in conjunction with the main speaker jack. If this

jack is used without the main speaker jack, there will

be no sound. The external speaker jack must be

used with an 8 ohm speaker enclosure.

E. CHANNEL SELECT - Allows the remote switching

from the NORMAL channel to the DRIVE channel.

F. DRIVE/MORE DRIVE - Allows the remote

switching of the Gain from Drive to More Drive.

NOTE: The tubes, external speaker jack, speaker

jack and fuse are not accessible by the user in

Scandinavian countries. Refer any servicing or

changes to a qualified technician.

FENDER MUSICAL INTRUMENTS CORP.

MADE U.S.A.

CHANNEL SELECT

DRIVE / MORE DRIVE