Garmin G1000 Manual Supplement page 51

Integrated avionics system
Hide thumbs Also See for G1000:
Table of Contents

Advertisement

FAA APPROVED AIRPLANE FLIGHT MANUAL SUPPLEMENT
GARMIN G1000 INTEGRATED AVIONICS SYSTEM
DIAMOND MODEL DA 40
DIAMOND MODEL DA 40 F
18. RPM lever (DA 40 only) ......................................pull back until a drop of max.
500 RPM is reached – HIGH RPM;
Cycle 3 times
18a Carburetor Heat (DA 40 F only)...................................................check function
18b Throttle (DA 40 F only)................................ MAX PWR, minimum 2200 RPM
NOTE (DA 40 F only)
The result of the ground check at full throttle depends on a number of
environmental factors, e.g. temperature, ambient air pressure and in particular
head or tailwind components.
Headwind will cause a higher RPM than
tailwind.
19. Throttle ......................................................................................... set 1000 RPM
20. Carburetor Heat (DA 40 F only)..................................................... check COLD
21. Alternate Air (DA 40 only)........................................................ check CLOSED
22. Flight Plan................................................................................................ entered
23. Altimeter setting ................................................................................checked/set
(G1000 and standby altimeter)
24. Altitude preselector..........................................................................................set
25. Radios .........................................................................................set and checked
26. Transponder ............................................................................................ code set
27. Standby attitude gyro ................................................................ erect and no flag
28. Parking brake ............................................................................................ release
29. Landing light................................................................................ON as required
190-00492-10 Rev 5
Diamond DA 40 / DA 40F
Page 51 of 65

Advertisement

Table of Contents
loading

Table of Contents