Table of Contents
Advertisement
Chapter 2:
Connecting the Extender
2.1
Setting Up the Extender
1.
Attach the antenna(s) to the R-SMA connector(s) at the back of the Extender.
Note: The number of antennas varies depending on model.
2.
Position the antenna(s) for proper placement.
3.
Connect the power adapter to the power jack of the Extender and then plug the
power adapter to a power outlet.
4.
Connect a host computer to access the web-based configuration utility.
Note: For initial configuration, it is recommended to connect the host computer to the
LAN port with an Ethernet cable, see "Connecting Wired Devices" on page 7.
Or, to connect a computer wirelessly, search and connect to the Extender
default network:
5.
After connecting the host computer, configure the computer to be able to
access the web-based configuration utility, see "Accessing the Web-based
Configuration Utility" on page 8.
Network name (SSID): default
Security: disabled
www.encore-usa.com
6
Advertisement
Table of Contents
