Encore N300 Series Quick Installation Manual page 23

C. WPA / WPA2 / WPA2-Auto with EAP
Select EAP (Extensible Authentication Protocol) if a Radius server is connected in the
wireless network.
Encryption Type — Select TKIP, AES, or Auto encryption.
Note: TKIP is available for B or G WLAN band only. The WLAN Band setting is under
Wireless > Advanced menu.
Radius Server 1 — Enter the following information:

IP Address: The IP address of the authentication server.

Port: The port number used to connect to the authentication server.

Shared Secret: The secret passphrase to connect to the authentication server.
WDS Security — Select Enable to prompt users to enter a security key before allowing
access to the wireless network.
WDS Auth Type — Select the type of security to use: WEP or WPA2.
D. WEP
With WEP (Wired Equivalent Privacy), wireless clients must enter the same key to connect
to the wireless network.
WEP Key Format — Select a security key format:


WEP Key Length — Select an encryption length:


WEP Key — Enter desired security key.
WPA2
E.
WPA2 provides a more secured encryption.
Passphrase and Confirmed Passphrase — Enter a passphrase with at least 8
characters.
HEX: To enter a security key using the characters 0~9, A~F, a~f.
ASCII: To enter a security key in alphanumeric format.
64-bit: To enter a 10-character security key.
128-bit: To enter a 26-character security key.
www.encore-usa.com
22