Table of Contents
Advertisement
3.
4.
5.
On Password and Verify Password, enter
desired password for the Extender
web-based configuration utility.
Click Next to continue.
Leave the LAN IP Address and LAN
Subnet Mask to their default settings.
By default, DHCP Server is "Disabled". In
most cases, the wired router assigns an IP
address to the Extender when it connects
to the network, so it is recommended to
leave the DHCP Server "Disabled".
Otherwise, select DHCP Server
"Enabled", then enter the IP range in
Range Start and Range End.
Click "Next" to continue.
Enter a name for your wireless network on
SSID and select a radio channel in
Channel. These will be used by
networking devices to connect to the
Extender.
Click Next to continue.
11
www.encore-usa.com
Advertisement
Table of Contents
