WEP
A.
With WEP (Wired Equivalent Privacy), wireless clients must enter the same key to connect
to the wireless network.
WEP Key Format — Select a security key format:
WEP Key Length — Select an encryption length:
WEP Key — Enter desired security key.
WPA2
B.
WPA2 provides a more secured encryption.
Passphrase and Confirmed Passphrase — Enter a passphrase with at least 8
characters.
To add access points in the WDS, do the following:
1.
Click the Search button to search for access points. A window appears with a
list of available access points.
2.
Click Connect of the corresponding access point. The MAC address is shown
on MAC.
3.
Click the Add button to add the access point to the WDS. The Extender reboots
for settings to take effect.
4.
Repeat the above steps to add more access points.
HEX: To enter a security key using the characters 0~9, A~F, a~f.
ASCII: To enter a security key in alphanumeric format.
64-bit: To enter a 10-character security key.
128-bit: To enter a 26-character security key.
www.encore-usa.com
19