Back Panel And Connectors - Encore N300 Series Quick Installation Manual

1.4

Back Panel and Connectors

Note: The number of antenna connectors differs per model. The N300 Series has two antenna
connectors (items 1 and 5), while the N150 Series only has one (item 1).
Port / Button
R-SMA Connector Attach the external antenna.
1
LAN (1/2/3/4/5)
2
Ports
3 Reset Button
4 POWER Jack
5 R-SMA Connector
Connect wired network and devices, such as a computer,
NAS, IP camera, print server, switch, and access point,
using RJ-45 Ethernet cables.
Press and hold the Reset button for 6 seconds to restore the
Extender to its default settings.
Note:

Use a pointed object such as a pen or a paper clip to
press the button.

Using the reset function overrides all user-defined
settings. If you are experiencing problems with the
Extender, perform other troubleshooting methods first
or reset using the web-based configuration utility.
Resetting the Extender should be the last resort.
Connect the supplied power adapter.
Note: Use only the supplied power adapter. Using power
adapters not recommended by the manufacturer may
damage the Extender or the connected devices.
Attach the second external antenna.
Note: This port is available only in N300 Series.
5
www.encore-usa.com
Description