Figure 2-14: Si Cpe Wall Mount - Alvarion BreezeMAX PRO-S CPE Product Manual

Chapter 2 - Installation
Use the two hangers on the rear to hang the mounting bracket on the two
3
screws. Make sure the bracket is stable.
Insert one side of the Si CPE's base diagonally under the designated rail.
4
Gently apply pressure on the opposite side of the Si CPE, until a clicking
5
sound is heard and the two bracket studs are locked onto the Si CPE's base.
To dismount the Si CPE, gently push the two bracket studs in the direction of the
wall and lift the CPE diagonally. Pull the CPE until free from the rail.
2.3.5.3 Wall Mounting the Power Adapter
Use the wall mounting kit included with the unit for wall mounting the Power
Adapter.
42

Figure 2-14: Si CPE Wall Mount

BreezeMAX CPEs Product Manual