Spectrum Analyzer - Alvarion BreezeMAX PRO-S CPE Product Manual

4.9.2.2 Reset Counters
Select this options to reset all the counters.
4.9.3

Spectrum Analyzer

The Spectrum Analyzer option enables initiating a spectrum analysis test on
selected frequencies/antennas, terminating an active test and viewing the results
of the last test.
NOTE
During the test, the SU switches to receive mode and is disconnected from the AU.
Using the parameters defined for the test, the SU scans the selected central
frequencies. At each frequency it measures the RSSI for each of the applicable
sub-carrier frequencies, and calculates the median RSSI (for all sub-carriers).
After completion of the test the results are displayed automatically.
The displayed results include for each of the tested central frequency and
antennas the median RSSI and the MAX (highest) RSSI measurement at the
relevant sub-carries.
CAUTION
After completion of the test (and viewing the results) exit the menu by selecting the Exit Spectrum
Mode option. This will automatically reset the SU. The SU must be reset to resume normal
operation.
The Spectrum Analyzer menu includes the following options:
Start Frequency
Stop Frequency
Scanning Step
Single Freq Scanning Duration
Antenna to be tested
Show Parameters
Start Scanning
BreezeMAX CPEs Product Manual
Performance Monitoring Menu
105