Table 4-1: Intermediate Steps - Alvarion BreezeMAX PRO-S CPE Product Manual

Step Effect on scanned frequencies set when Step is Enabled
1 Start Frequency is added to the set of "Main Frequencies"
2 All intermediate frequencies defined by "Main Frequency" + 125 KHz are added to the scanning set
3 All intermediate frequencies defined by "Main Frequency" + 250 KHz are added to the scanning set
4 All intermediate frequencies defined by "Main Frequency" + 375 KHz are added to the scanning set
5 All intermediate frequencies defined by "Main Frequency" + 500 KHz are added to the scanning set
6 All intermediate frequencies defined by "Main Frequency" + 625 KHz are added to the scanning set
7 All intermediate frequencies defined by "Main Frequency" + 750 KHz are added to the scanning set
8 For a bandwidth of 3.5 MHz: All intermediate frequencies defined by "Main Frequency" + 875 KHz are
added to the scanning set
For a bandwidth of 5 MHz: All intermediate frequencies defined by "Main Frequency" + 1250 KHz are
added to the scanning set
For example, If Steps 1,2 and 5 are enabled and all other steps are disabled, the
scanned frequencies are: Start Frequency, Start Frequency + 125 KHz, Start
Frequency + 500 KHz, Start Frequency +N*Main Step, Start Frequency +N*Main
Step + 125 KHz, Start Frequency +N*Main Step + 500 KHz (N=1, 2,...). End
Frequency is the upper limit for the scanned frequencies.
In addition, the Discrete Frequencies option enables defining up to 10 discrete
frequencies to be used in the scanning process in addition to the frequencies
defined by the Frequency Scanning parameters.
The Frequency Scanning menu includes the following options:
Show scanning parameters
Show scanning Tables
Start Rx frequency
End Rx frequency
Set main & intermediate steps
Discrete scanning frequencies
Update scanning Tables
BreezeMAX CPEs Product Manual

Table 4-1: Intermediate Steps

Radio Parameters Menu
95