The default Preferred BST/AU ID Mask is 0.0.0.0.0.0.
4.6.6
Selected BST/AU Parameters
Select this option to view the following details on the selected BST/AU:
Selected BST/AU ID
Selected Rx Frequency
RSSI of the received signal, in dBm
SNR of the received signal, in dB
Selected Rx Antenna
4.6.7
Set Mobility Mode
The Set Mobility Mode enables defining the expected mobility of the SU: nomadic
or mobile.
4.6.8
Show Mobility Mode
Select this option to view the current Mobility Mode.
4.6.9
Best BST/AU Table
Select this option to view the following details for each of the BST(s)/AU(s) found
during the scanning process:
BST/AU ID
Rx Frequency
SNR (dB)
Antenna
BreezeMAX CPEs Product Manual
BST/AU ID Parameters Menu
93