Fitting The Color Toner Cartridge - Canon iR C6800 Series Installation Procedure

1) Open the front cover.
2) Push the release button, and slide out the right deck.
3) Remove the screws [4] (3 pc. in total), and detach
the rear end guide plate [1], left guide plate [2], and
right guide plate [3]. Then, fix them in place to suit the
needs of the user.
[1]
[3]
F-1-104
at time of shipment : A4 size (100/230V),LTR size
(120V)
4) Deposit paper in the right deck; then, slide it back
into the machine.
5) Attach the size sticker [1] of the new paper size to
the frond of the deck.
F-1-105
6) As necessary, perform the same work on the left
deck.
7) After changing the size, execute the following in
service mode to register the front deck paper size: for
the right deck, COPIER>OPTION>CST>P-SZ-C1;
for the left deck, COPIER>OPTION>CST>P-SZ-C2
[2]
[4]
[1]
(A4=0, B5=1, LTR=2).
8) Press the Reset key twice to end service mode.
1.2.16 Fitting the Color
Toner Cartridge
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
1) Take out the color toner cartridge (yellow,
magenta, cyan) from its packaging box.
2) Hold the color toner cartridge (yellow, magenta,
cyan) as shown with both hands, and turn it in the
direction of the arrows 10 times to even out the toner
inside it.
F-1-106
When turning the color toner cartridge, be sure
not to touch the shutter assembly or turn the knob;
otherwise, the toner can start to leak.
F-1-107
3) Check to see that the control panel indicates the
message "Set the Toner Cartridge."
Chapter 1
0002-6703
29