Canon iR C6800 Series Portable Manual page 352

Chapter 5
Subheadi
ng
SND-
RATE
CTM-S06
CTM-S07
FXEX-
CNT
PAS-
RGST
<CST>
5-158
COPIER>OPTION>USER
Use it to set the rate of compression when SEND-RATE is set to 'high'
Settings
0: 1/16
1: 1/20
2: 1/24
A higher rate of compression will lower the image quality.
at time of shipment/upon RAM initialization: 0
Use it to remove the password from an export file (file transmission
address).
range of settings
0:do not remove password from export file
1:remove password from export file.
at time of shipment/upon RAM initialization: 0
Use it to remove the source indication of the transmission password on
the Edit screen (RUI address indication).
range of settings
0:do not remove source indication of transmission password on Edit
screen
1:remove source indication of transmission password on Edit screen
at time of shipment/upon RAM initialization: 0
Use it to set the temperature control hysterisis width for the outside
heating roller.
The outside heating roller of the machine has a low heating capacity and
tends to go on and off frequently; this mode is offered to prevent
flickering.
Settings range
0: hysterisis width = -/+1 deg C (225 deg C -/+1 deg C) efault)
1: hysterisis width = -/+2 deg C (224 deg C -/+2 deg C)
2: hysterisis width = -/+3.5 deg C (222.5 deg C -/+3.5 deg C)
3: hysterisis width = -/+4.5 deg C (221.5 deg C -/+4.5 deg C)
[at time of shipment/upon RAM initialization: 0]
Character entry settings on the password registration screen
Settings
0: Entered characters are displayed in plain text form
[Factory default/After RAM is cleared]
1: Entered characters are in encrypted form (****)
Contents Level
2
2
2
2
2