Canon iR C6800 Series Portable Manual page 143

Code Cause/Particulars of detection
0001 The guide home position sensor does
not go on when the guide motor has
been driven for 0.45 sec.
The guide motor (M3S) or the guide
home position sensor (PI3S) is faulty.
0002 The guide home position sensor doest
not go off when the guide motor has
been driven for 1 sec.
The guide motor (M3S) or the guide
home position sensor (PI3S) is faulty.
E5F3 There is an error in saddle alignment.
0001 The aligning plate home position
sensors does not go on when the
alignment motor has been driven for 05.
sec (during initialization, 1.67 sec).
The alignment motor (M5S) or the
aligning plate home position sensor
(PI5S) is faulty.
0002 The alignment plate home position
sensor does not go off when the
alignment motor has been driven for 1
sec.
The alignment motor (M5S) for the
alignment plate home position sensor
(PI5S) is faulty.
E5F4 There is an error in saddle rear sampling.
0001 The stitching home position sensor
does not go on when the stapler motor
(rear) is rotated in reverse for 0.5 sec or
more.
The switch motor (rear, M65) or the
stitching home position sensor (rear,
MS5S) is faulty.
0002 The stitching home position sensor
does not go off when the switch motor
(rear) is reverse for 0.5 sec or more.
The switch motor (rear, M6S) or the
stitching home position sensor (rear,
MS5S) is faulty.
E5F5 There is an error in saddle front stapling.
Remarks
Check the guide motor (M3S) /guide
home position sensor (PI13S).
Check the guide motor (M3S) /guide
home position sensor (PI13S).
Check the alignment motor (M5S) /
aligning plate home position sensor
(PI5S).
Check the alignment motor (M5S) /
aligning plate home position sensor
(PI5S).
Check he stitching motor (rear; M6S) /
stitching home position sensor (rear;
MS5S).
Check he stitching motor (rear; M6S) /
stitching home position sensor (rear;
MS5S).