Avidyne IFD540 Pilot's Manual page 216

IFD Glove Qualification Procedure
Pilot Name
Description of Glove
Test Step
Touch the standby frequency window and
verify a virtual keyboard is displayed.
Type 121.7, press the "ENTER" button on the
virtual keyboard and confirm 121.700 is the
displayed frequency in the #1 Standby Com
window.
Press each of the page tabs displayed on the
present page and verify the IFD changes to the
selected tab.
With the FMS FPL tab displayed, use touch to
type in a typical flight plan and verify that all
entries were recognized.
With the Map page and tab displayed, attempt
to pan the map.
With the Map page and tab displayed, attempt
to pinch zoom (in or out) the map to produce a
range change.
With the Map page and tab displayed, attempt
to graphically flight plan ("rubber band") and
verify the intended change was made.
Press the "Freq" function key on the bezel and
then double tap a frequency from the list to
place it into the #1 standby slot.
6-40 General
Circle one
Pass Fail
Pass Fail
Pass Fail
Pass Fail
Pass Fail
Pass Fail
Pass Fail
Pass Fail