Transmission; Automatic Transmission - Ford Ranger Raptor 2018 Supplement Manual

Table of Contents

Advertisement

AUTOMATIC TRANSMISSION

WARNING: Always fully apply the
parking brake. Make sure you shift into park
(P) for vehicles with an automatic
transmission. Switch the ignition off and
remove the key whenever you leave your
vehicle.
WARNING: Do not apply the brake
pedal and accelerator pedal
simultaneously. Applying both pedals
simultaneously for more than a few
seconds will limit engine performance,
which may result in difficulty maintaining
speed in traffic and could lead to serious
injury.
Transmission Selector Lever
Positions
E269655
P
Park.
R
Reverse.
N
Neutral.
D
Drive.
M
Manual mode and manual
shifting.
Ranger Raptor (TKD) Raptor, Vehicles Built From: 21-05-2018, JB3B 19A285 CKA enPHI, Edition date: 201804, First-Printing

Transmission

Press the button (1) on the transmission
selector lever (2) to select reverse (R) or
drive (D). After the transmission is in drive
(D), you can then press the button (1) on
the transmission selector lever (2) again
to select manual (M). The current gear
displays on the instrument panel.
Manual (M)
With the transmission selector lever in the
manual (M) position, you can change gears
up or down. By moving the transmission
selector lever from drive (D) to manual
(M), you now have control of selecting the
gear you desire using the paddle shifters
on the steering wheel. To return to normal
drive (D) position, move the transmission
selector lever back from manual (M) to
drive (D).
SelectShift
Transmission
Your vehicle has a SelectShift automatic
transmission gearshift lever and steering
wheel mounted shifter paddles. The
SelectShift Automatic transmission gives
you the ability to change gears up or down,
without a clutch.
As long as the engine speed does not
exceed the maximum allowable limit,
downshifts are allowed. SelectShift
downshifts at low engine speeds to
prevent engine stalls.
Note: Engine damage may occur if you
maintain excessive engine revving without
shifting.
SelectShift does not automatically upshift,
even if the engine is approaching the RPM
limit.
10 speed transmissions - with the
transmission selector lever in the manual
(M) position:
Pull the right paddle (+) to upshift.
Pull the left paddle (–) to downshift.
11
Automatic

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents