Delta ShopMaster S26-263L Instruction Manual page 7

A. Motor
B. Fence
C. Throat Plate
D. Mitre Lock Knob
E. Support Extensions
F. Mitre Scale with Positive Stops
G. Horizontal Work Clamp
H. Base with Carry Handles
I. Mounting Holes
J. On-Board Wrench
K. Work Table
L. Bevel Lock Knob
M. Dust Bag
N. Upper and Lower Blade Guards
O. Blade (not visible)
P. Saw Head Handle
Q. Spindle lock
R. Slide Lock Knob
S. Electric Brake (not shown)
T. Laser
U. Power Switch (not visible)
V. Power Safety Toggle
KNOW YOUR COMPOUND MITRE SAW
Refer to Figure 1.
Using this tool safely requires that you understand the
information provided in this operator's manual, as well as
the project you are attempting. Before using this product,
familiarize yourself with all operating features and safety
rules.
A. 15-AMP MOTOR: This tool features a powerful
15-amp motor with all ball bearings and externally
accessible brushes for ease of servicing.
B. FENCE: The mitre fence supports the workpiece
when making all cuts.
C. THROAT PLATE: The throat plate supports the
workpiece and provides a safe working surface.
D. MITRE LOCK: The mitre lock knob securely locks the
saw at desired mitre angles.
E. SUPPORT EXTENSIONS: Use these to help support
large pieces when necessary.
F. MITRE SCALE WITH POSITIVE STOPS: Positive
stops have been provided at 0°, 15°, 22-1/2°, 31.6°,
and 45°. The blade stops have been provided on
both the left and right side of the mitre table.
G. HORIZONTAL WORK CLAMP: The horizontal work
clamp helps to position and secure the workpiece
FEATURES
T
I O
J
G
x4
K
E
D
H. BASE WITH CARRY HANDLES: Supports the tool
I.
J. BLADE WRENCH STORAGE: The included blade
K. WORK TABLE: Sturdy, large die-cast aluminum work
L. BEVEL LOCK: the bevel lock knob secures the saw
M. DUST COLLECTION BAG: The included dust bag
7
N Q U V
C H
F
FIGURE 1
to the fence, ensuring safer operation and more
accurate cuts.
and features mounting holes. Use the carry handles
which are designed into the base for safe and easy
transportation of the saw.
MOUNTING HOLES: Enable you to securely mount
the tool to a stable surface.
wrench features a Phillips screwdriver at one
end and a hex key at the other. Use the hex key
when installing or removing blade and the Phillips
screwdriver when removing or loosening screws.
When not in use, the wrench can be stored in the
base of the saw.
table provides a level and sturdy work surface.
at the desired angle for bevel cuts. There are positive
stop screws on each side of the saw arm for making
fine adjustments at 0° and 45°.
attaches and detached quickly with the integrated
clamp for easy cleaning.
P A
M
R
L
B
E