Advertisement
reference
Troubleshooting
Before requesting service (troubleshooting), please check the following.
Problem
• 5.1 channel sound is reproduced only when the following conditions
are met. :
5.1 channel
1) The DVD player is connected with the proper Amplifier
sound is not being
2) The disc is recorded with 5.1 channel sound.
reproduced.
• Check whether the disc being played has the "5.1 ch" mark on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
The screen is
• Press the
button (in front panel) for more than 5 seconds under no disc inside. All settings
blocked
will revert to the factory settings.
•
Press the
button (in front panel) for more than 5 seconds under no disc inside. All setings
Forgot password.
including the password will revert to the factory settings. Don't use this unless absolutely
necessary.
Specifications
Power Requirements
Weight
Power Comsumption
General
Dimensions
Operating Temperature Range
Operating Humidity Range
Video Output
Component Video
Frequency Response
Audio Output
5.1 Channel (DVD-P490/490K)
Action
AC 110-240 V ~ 50/60 Hz
DVD-P290/P290K/P295K/P390/P390K/
P490/P490K : 1.6 Kg
DVD-P190/191/191K/P192 : 1.3 Kg
8W
DVD-P290/P290K/P295K/P390/P390K/P490/P490K :
430mm (W)X 203mm (D) X 37mm (H)
DVD-P190/P192/P191/P191K :
360mm (W) X 203mm(D) X 37mm (H)
+5°C to +35°C
10 % to 75 %
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
20Hz ~ 202kHz
F/L,F/R,R/L,R/R,CT,S/W
memo
11
Advertisement
Chapters
