DVD-P191K DVD Player user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register AK68-01777D...
precautions 1. Setting up - Refer to the identification label located on the rear of your player for its proper operat- ing voltage. - Install your player in a cabinet with ade- quate ventilation holes. (7~10cm) Do not block ventilation holes on any of the compo- nents for air circulation.
before you start Accessories Check for the supplied accessories below Remote Control User’s Manual The accessories which do not supplied 1. Component cable 2. Coaxial cable Install Batteries in the Remote control 1. Open the battery cover on the back of the remote control.
PICTURE, IN CASE OF 480 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING YOUR TV SET COMPATIBILITY WITH THIS MODEL 480p DVD PLAYER, PLEASE CONTACT SAMSUNG'S CUSTOMER SERVICE CENTER.”...
Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Recording Types Disc Types (Logos) Audio Video VIDEO-CD Audio Video AUDIO-CD Audio Disc Markings Play Region Number NTSC broadcast system in U.S.A, NTSC Canada, Korea, Japan, etc.
setup Description Front Panel Controls POWER ON/OFF ( ) Turn on/off and the player is turned on/off. DISC TRAY Place the disc here. Connect Microphone for karaoke functions. Front Panel Display Total playing time/Displays various messages concerning operations such as PLAY, STOP, LOAD ...
Rear Panel AUDIO OUT JACKS - Connect to the Audio input jacks of your television or audio/video receiver. VIDEO OUT JACK - Use a video cable to connect to the Video input jack on your television. COMPONENT VIDEO OUT JACKS - Use these jacks if you have a TV with Component Video in jacks.
STOP Button ( SKIP Buttons ( Use to skip the title, chapter or track MENU Button Brings up the DVD player’s menu. ENTER/π / † , √ / ® Buttons This button functions as a toggle switch. AUDIO Button (√) Use this button to access various audio functions on a disc.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD player. - If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video Output mode changes in the following sequence: (P-SCAN ➝ I-SCAN).
Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV.
Page 11
Connection to a TV (Progressive) Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV.
Connection to an Audio System (2 Channel Amplifier) Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. Using the video signal cable(s), connect the VIDEO,...
Page 13
Connection to an Audio System (Dolby Digital, MPEG2 or DTS Amplifier) If using a coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
basic functions Playing a Disc Before Play - Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV remote control. - If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
Using the Search and Skip Functions During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching through a Chapter or Track During play, press the SEARCH ( remote control for more than 1 second.
basic functions Using the Title Menu 1. During stop mode, press the MENU button on the remote control. 2. Press the π/† buttons to select Title Menu, then press the ® or ENTER button. Note - Depending on a disc, the Title Menu may not work.
advance functions Adjusting the Aspect Ratio (EZ View) To play back using aspect ratio (DVD) 1. During play, press the INFO button on the remote control. 2. Press the π/† buttons to select Shortcut, then press the ENTER button. 3. Press the √/® buttons to select EZ View, then press the ENTER button.
advance functions MPEG4 Press AUDIO / √ button at remocon repeatedly to PCM 1/2 select the desired Audio on MPEG4 then press the ENTER. 2. To remove the AUDIO icon, press the CANCEL or RETURN button. Note - This function depends on audio languages are encod- ed on the disc and may not work.
Bookmark Shortcut Bookmark Shortcut 3. Press the √/® buttons to select Bookmark, then press the ENTER button. 4. When you reach the scene you want to mark, press the ENTER button. Up to three scenes may be marked at a time. Note - Depending on a disc, the Bookmark function may not work.
REPEAT - Important: The above recommendations cannot be taken as a guarantee that the DVD player will play MP3 recordings, or as an assurance of sound quality. You should note that certain technologies and methods for MP3 file recording on...
MPEG4 Playback MPEG4 Play Function AVI files are used to contain the audio and video data. Only AVI format files with the “.avi” extensions can be played. 1. Open the disc tray. Place the disc on the tray. Close the tray. 2.
Page 22
advance functions • Before beginning the Slide Show, the picture interval must be set. • : When this icon is selected and ENTER is pressed, the pictures change automatically with about a 6 second interval. • : The pictures change automatically with about a 12 second interval.
karaoke function Karaoke Functions Operation Sequence 1. Connect the Mixed Audio Out terminals with the TV or Amplifier. (see page 9 to 13) 2. Connect Mic into Mic jack. When a MIC is con nected, the karaoke functions can be used. Mic Volume / Key Control 1.
Using the Setup Menu The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television screen you have.
Using the Audio Language 1. With the unit in Stop mode, press the MENU button. 2. Press the π/† buttons to select Setup, then press the ® or ENTER button. 3. Press the π/† buttons to select Language Setup, then press the ®...
changing setup menu ❶ Dolby Digital Out - PCM : Converts to PCM(2CH) audio. - Bitstream : Outputs Dolby Digital or DTS via the digital output. Select Bitstream when connecting to a Dolby Digital or DTS Decoder. ❷ MPEG-2 Digital Out - PCM : Converts to PCM (2CH) audio.
❹ TV System - Auto - NTSC : In case of using NTSC disc • If your TV system only has PAL-Video input, you must choose “PAL”. When you choose “PAL”, Interlace output format is PAL 60 Hz output. • If your TV system only has NTSC, input you must choose “NTSC ”.
changing setup menu To make the setup menu disappear, press the MENU button. For example, if you select up to Level 6, discs that contain Level 7,8 will not play. Changing the Password 1. With the unit in Stop mode, press the MENU button. 2.
Firmware upgrade Introduction Samsung will often support the software upgrade to improve the performance of this unit to the latest sta- tus, through Samsung Internet Site (www.samsung. com). What improvements are made depends on the upgrade software you are using as well as the software that your DVD-player contained before the upgrade.
reference Troubleshooting Before requesting service (troubleshooting), please check the following. Problem • Check the batteries in the remote control. They may need replacing. No operations can be • Operate the remote control at a distance of no more than 20 feet. performed with the •...
*Frequency Response Output Digital Audio Output Note: - Samsung Electronics Co., Ltd reserves the right to change the specifications with out notice. - Weight and dimensions are approximate. AC 110-240 V, 50/60 Hz 1.3 Kg 360mm (W) X 203mm (D) X 37mm (H) +5°C to +35°C...
Page 32
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Region Country CANADA North America MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR Latin America...